Comments on: GPRS or EDGE setting for Aktel and GP

By: shamim

shamim — Sat, 27 Feb 2010 05:11:07 +0000

sent ota for gp

By: Masud

Masud — Thu, 10 Dec 2009 08:18:30 +0000

I want to install my EDGE MODEM which MODEL No is E67. But i’ve no it’s cd. Now what can i do?

By: lavluda

lavluda — Wed, 25 Nov 2009 03:22:26 +0000

first use wvdialconf to generate the configuration file. then edit that file and add the extra lines from your current configuration.

please let me know if you need more details.

By: A'zubeir

A'zubeir — Mon, 23 Nov 2009 03:58:14 +0000

Hello all !
I’m trying to configure wvdial.conf for connect to the internet using AKTel SIM and a GPRS Modem.
In my wvdial.conf file, I wrote this code:
————————————-
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
ISDN = 0
Phone = *99***1#
Modem = /dev/ttyUSB0
Username = xyz
Password = xyz
Baud = 115200
————————————-
But, whenever I want to run wvdial, it whows my those line:
–> Initializing modem.
–> Sending: ATZ
ATZ
OK
–> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ERROR
–> Bad init string.

If anyone detects the error in my wvdial file, please, correct it and give me the right one.
Thank you all for your help.

By: Tanjil Islam

Tanjil Islam — Thu, 12 Nov 2009 05:17:50 +0000

I can use GP modem in ubuntu os but i can’t use it in RHEL5 using wvdialconf. It doesn’t work. Please help me.

By: dibbyo

dibbyo — Fri, 16 Oct 2009 06:16:20 +0000

how ? i have a aktel modem but i cannot set this in my pc i need ip,dns,wns,apn & etc. please sole this for me

By: Rafi

Rafi — Wed, 30 Sep 2009 06:54:50 +0000

assamualaikum,
Is there any way that i can use my NOKIA 3110c phone as modem in Puppy Linux?? I’m using Banglalink Edge Unlimited…pLz heLp

By: debashish

debashish — Sat, 12 Sep 2009 17:41:16 +0000

lavluda,
please help me.

By: debashish

debashish — Sat, 12 Sep 2009 03:33:30 +0000

hi everybody,

i’m in the same vessel as Sajeeb Saha. But i’m using chinese EDGE modem AF-E67 in UBUNTU 9.04 with GP sim. here is my last 20 lines output using “sudo dmesg”:

[ 115.649284] mtrr: no MTRR for e4000000,2000000 found
[ 117.344154] mtrr: no MTRR for e4000000,2000000 found
[ 117.445173] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 117.445207] agpgart-intel 0000:00:00.0: putting AGP V2 device into 1x mode
[ 117.445236] pci 0000:01:00.0: putting AGP V2 device into 1x mode
[ 205.024024] usb 1-1: new full speed USB device using uhci_hcd and address 3
[ 205.224195] usb 1-1: configuration #1 chosen from 1 choice
[ 242.496095] usbcore: deregistering interface driver ndiswrapper
[ 242.557913] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
[ 242.708031] usb 1-1: reset full speed USB device using uhci_hcd and address 3
[ 242.877685] ndiswrapper (import:242): unknown symbol: ntoskrnl.exe:’ExAllocatePoolWithQuotaTag’
[ 242.877715] ndiswrapper (import:242): unknown symbol: ntoskrnl.exe:’MmLockPagableSectionByHandle’
[ 242.877732] ndiswrapper (import:242): unknown symbol: ntoskrnl.exe:’MmQuerySystemSize’
[ 242.877876] ndiswrapper (import:242): unknown symbol: ntoskrnl.exe:’IoGetConfigurationInformation’
[ 242.877948] ndiswrapper (import:242): unknown symbol: ntoskrnl.exe:’atol’
[ 242.878025] ndiswrapper (import:242): unknown symbol: HAL.dll:’ExReleaseFastMutex’
[ 242.878060] ndiswrapper (import:242): unknown symbol: HAL.dll:’ExAcquireFastMutex’
[ 242.878124] ndiswrapper (load_sys_files:206): couldn’t prepare driver ‘oxser’
[ 242.879677] ndiswrapper (load_wrap_driver:108): couldn’t load driver oxser; check system log for messages from ‘loadndisdriver’
[ 242.879772] usbcore: registered new interface driver ndiswrapper

if you need any info please tell me.
regards

Debashish

By: lavluda

lavluda — Thu, 10 Sep 2009 10:36:20 +0000

after inserting the modem, please give me the output of “sudo dmesg” and copy and paste last 10-20 lines here. then may be i can help you.

By: Sajeeb Saha

Sajeeb Saha — Wed, 09 Sep 2009 18:08:45 +0000

Hello everyone,

Can anyone tell me the settings for using the Grammenphone EDGE modem in fedora 8 (I am trying to use the modem not any cellphone) with gp sim card.

Thanks in advance….

Sajeeb

By: Titu

Titu — Sun, 23 Aug 2009 16:46:30 +0000

I want to use internet on my PC.my modem is samsung E-250.what can i do now?tell me the system.

By: lavluda

lavluda — Sat, 15 Aug 2009 16:54:37 +0000

@eamin yea, why not ? just create a new connection or account using apn as blank (empty), that's all

By: eamin

eamin — Fri, 14 Aug 2009 16:43:25 +0000

ami ki gp modeme aktel use korte parbo

By: lavluda

lavluda — Sun, 02 Aug 2009 15:26:14 +0000

@siraj if there is any bandwidth use, the sim will not able to recive call. you can do one simple thing, use divert on net sim with "divert when not available", it works fine for me .

By: alamin

alamin — Wed, 19 Dec 2007 08:49:08 +0000

How Can setup Wireless Lan.

By: siraj

siraj — Tue, 18 Dec 2007 09:45:47 +0000

How can i use modem and cell at a time by GP.When i use my cell as modem no incoming call come to my number.have their any way of using both at a time.i mean when anyone try 2 my number then call will come to that number.

By: Shahjahan

Shahjahan — Thu, 13 Dec 2007 14:15:37 +0000

Dear Lavlu bhai
I cell phone is Nokia 6300 and i want to use gp internet via Bluetuth. how can i setup this in my pc. can u halp me.
Thanks
jahan

By: Al Amin

Al Amin — Mon, 10 Dec 2007 05:25:46 +0000

I have setup a EDGE Modem with sim. After setup Driver. Connection setup completed. When I dail 1 minit after Connection has Disconnet. Plz Help me . I need to Full modem & Connection setup with Picture.
Al Amin

By: Rabiul

Rabiul — Wed, 28 Nov 2007 14:37:49 +0000

Assalamualaikum. The above wvdial command connects to mobile. But to browse the web I have to put dns numbers in /etc/resolv.conf file. My /etc/resolv.conf file is as bellow:

######

nameserver 202.56.4.120
nameserver 202.56.4.121

######

I am using grameen phone’s internet. The dns numbers is shown on terminal after wvdial connects successfully. So it can be copied from there.

VAskor, GP’s internet speed is something like the speed of any medium quality cybercafe. More or less 3 to 7 kbps. But the line always remains active.

Thank you. Khoda Hafez.

By: VAskor

VAskor — Wed, 28 Nov 2007 07:40:33 +0000

I want to use gp internet. Can you tell me what is the speed of gp internet.

By: Rabiul

Rabiul — Wed, 21 Nov 2007 21:40:57 +0000

Now, there is a linux software ‘gprsec’ to connect mobile with pc. Has anyone tested that with bd operators?
How about chinese clone/pda sets? I heard there is no java in these and no application can be installed. Is this true? If so then it is useless to buy.
Take care. Khoda Hafez.

By: Rabiul

Rabiul — Wed, 21 Nov 2007 21:24:37 +0000

Sorry, an error occured in posting the above message. Here is again… copy and save the following as /etc/wvdial.conf:
############Copy From Here to:
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0 =0 &C1 &D2 + FCLASS=0
Init3 = AT+ CGDCONT = 1,”IP”,”gpinternet”
Modem Type = Analog Modem
ISDN = 0
Phone = *99 ***1#
Modem = /dev/ttyACM0
Username = xyz
Password = xyz
Baud = 460800
######## to here.

Now on terminal type:
wvdial
and it connects to internet.

By: Rabiul Hassan Khan

Rabiul Hassan Khan — Tue, 20 Nov 2007 21:29:11 +0000

Alhamdulillah. Thank you very much for the information. I can use my mobile’s internet on computer. My mobile is motorola l6. I connect it with computer on usb port. Then on terminal I give command:

wvdialconf create

After this completes the modem detection, I copy and save the following as /etc/wvdial.conf:

############Copy From Here to:
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT = 1,”IP”,”gpinternet”
Modem Type = Analog Modem
ISDN = 0
Phone = *99***1#
Modem = /dev/ttyACM0
Username = xyz
Password = xyz
Baud = 460800
######## Waiting for carrier and then connects telling –> Don’t know what to do! Starting pppd and hoping for the best. (This connects to grameen phone’s internet, let’s mention it too).

I wish to disconnect by pressing Ctrl + C, perhaps twice.

Thank you all again. May Allah give us peace.

By: akash

akash — Mon, 05 Nov 2007 06:59:39 +0000

Hi, i am akash. How can i set my gp internet on pc? ple tell detiles?

By: mithun

mithun — Wed, 23 May 2007 10:06:35 +0000

Let me knwo the UNLIMITED MONTHLY GPRS setup for Teletalk prepaid.

By: Anis

Anis — Wed, 16 May 2007 08:55:04 +0000

I can’t seeting up my phone as a modem. I using GP Line and nokia 6020 model. I am not getting the isp no of GP, for getting the connection in my desktom computer with my mobile.

Please anybody help me for this?

I have the Windos xp operating system. Att: Mr Salauddin66.

By: lavluda

lavluda — Sun, 13 May 2007 15:03:12 +0000

hi raquibul,
can you give me the output of “dmesg | grep tty”
what is your last output (after dail)

By: Raquibul

Raquibul — Sun, 13 May 2007 13:03:52 +0000

I’m usig nokia 6020 with data cable,and if i try this way it says time out,do i need any driver for it?If i need it where can i find it?

By: ov

ov — Sat, 12 May 2007 16:56:29 +0000

KB not Kb. i also think GP EDGE is better then some ISP